HGM6110CAN Generator controller, Single unit automation + CANBUS for SmartGen
auf Lager
Controller
Diselmart
HGM6110CAN SmartGen Generator controller, Single unit automation + CANBUS DESCRIPTION: Type:Controller Part Number：HGM6110CAN Condition: new，original Manufacturer Warranty: 1 Year Feature: 1. 132*...
HGM6110CAN SmartGen Generator controller, Single unit automation + CANBUS
DESCRIPTION:
Type:Controller
Part Number：HGM6110CAN
Condition: new，original
Manufacturer Warranty: 1 Year
Feature:
1. 132*64 LCD display with backlight, optional language interface (Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French), push-button operation;
2. Acrylic screen, improved wearable and scratch resistance property;
3. Silica-gel panel and keys can well adapt to higher and lower temperature;
4. With RS485 communication port, can achieve “three remote” functions via MODBUS protocol;
5. With CANBUS port which can be connected to electronic injection with J1939, it not only can monitor frequently-used data (such as water temperature, oil pressure, rotated speed and fuel consumption, etc.) but also can control start, stop, high speed and low speed (controller with CANBUS port is needed) via CANBUS port.
6. Adapt to 3P4W, 3P3W, 1P2W and 2P3W (120V/240V), 50Hz/60Hz AC power system;
7.Can measure and display 3 phase voltage, 3 phase current, frequency, power parameter of mains/gens;
8.Mains have functions of over/under voltage and lack of phase; Gens have functions of over/under voltage, over/under frequency, over current and over power;
9. Precision measure and display of parameters about engine,
10. Control protection: Automatic start/stop of genset, load transfer(ATS control) and perfect failure display and protection;
11. With ETS, idle speed control, pre-heat control, speed droop/raising control, all of them are relay output;
12. Parameter setting: Allow user to modify setting and store them in internal FLASH memory. The parameters cannot be lost even when power off. All of parameters can be set not only from the front panel, but also use USB interface (or PS485 interface) to adjust them via PC.;
13. Multi sensors of temperature, pressure and fuel level can be used directly, parameters can be defined by user;
14. Multi conditions of crank disconnect (speed sensor, oil pressure, generator) can be selected;
15. With emergency start function;
16. With flywheel teeth numbers automatic identification function;
17. Power supply range: (8~35)VDC, accommodating to different starting battery volts;
18. All parameters use digital modulation, instead of analog modulation using conventional potentiometer, having improved reliability and stability;
19. With maintenance function. Types (date or running time) can be selected and actions (warning or alarm shutdown) can be set when maintenance time out;
20. Event log, real-time clock, scheduled start & stop pump unit (can be set as start pump unit once a day/week/month whether with load or not);
21. Add rubber gasket between shell and controller screen, the waterproof can reach IP55;
22. Controller is fixed by metal fixing clips;
23. Modular design, flame-retardant ABS shell, embedded mounting, compact structure and easy installation.
Note:
1. Please make sure it will fit your machine before purchasing it. If you are not 100% sure this is what you need, please find out your engine model, series number and contact our Customer-service.
2. Please double check the part number of your item, matching information is for reference only.If you are unsure of the item, please contact us before buying to avoid unnecessary return, thanks!
3. Communication is the best way to solve the problem. If you have any problems after you receive the package, please contact us in time, before opening a return or case.
4.For more information please contact us info@diselmart.com. We will reply you in 24 hours.
DESCRIPTION:
Type:Controller
Part Number：HGM6110CAN
Condition: new，original
Manufacturer Warranty: 1 Year
Feature:
1. 132*64 LCD display with backlight, optional language interface (Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French), push-button operation;
2. Acrylic screen, improved wearable and scratch resistance property;
3. Silica-gel panel and keys can well adapt to higher and lower temperature;
4. With RS485 communication port, can achieve “three remote” functions via MODBUS protocol;
5. With CANBUS port which can be connected to electronic injection with J1939, it not only can monitor frequently-used data (such as water temperature, oil pressure, rotated speed and fuel consumption, etc.) but also can control start, stop, high speed and low speed (controller with CANBUS port is needed) via CANBUS port.
6. Adapt to 3P4W, 3P3W, 1P2W and 2P3W (120V/240V), 50Hz/60Hz AC power system;
7.Can measure and display 3 phase voltage, 3 phase current, frequency, power parameter of mains/gens;
8.Mains have functions of over/under voltage and lack of phase; Gens have functions of over/under voltage, over/under frequency, over current and over power;
9. Precision measure and display of parameters about engine,
10. Control protection: Automatic start/stop of genset, load transfer(ATS control) and perfect failure display and protection;
11. With ETS, idle speed control, pre-heat control, speed droop/raising control, all of them are relay output;
12. Parameter setting: Allow user to modify setting and store them in internal FLASH memory. The parameters cannot be lost even when power off. All of parameters can be set not only from the front panel, but also use USB interface (or PS485 interface) to adjust them via PC.;
13. Multi sensors of temperature, pressure and fuel level can be used directly, parameters can be defined by user;
14. Multi conditions of crank disconnect (speed sensor, oil pressure, generator) can be selected;
15. With emergency start function;
16. With flywheel teeth numbers automatic identification function;
17. Power supply range: (8~35)VDC, accommodating to different starting battery volts;
18. All parameters use digital modulation, instead of analog modulation using conventional potentiometer, having improved reliability and stability;
19. With maintenance function. Types (date or running time) can be selected and actions (warning or alarm shutdown) can be set when maintenance time out;
20. Event log, real-time clock, scheduled start & stop pump unit (can be set as start pump unit once a day/week/month whether with load or not);
21. Add rubber gasket between shell and controller screen, the waterproof can reach IP55;
22. Controller is fixed by metal fixing clips;
23. Modular design, flame-retardant ABS shell, embedded mounting, compact structure and easy installation.
Note:
1. Please make sure it will fit your machine before purchasing it. If you are not 100% sure this is what you need, please find out your engine model, series number and contact our Customer-service.
2. Please double check the part number of your item, matching information is for reference only.If you are unsure of the item, please contact us before buying to avoid unnecessary return, thanks!
3. Communication is the best way to solve the problem. If you have any problems after you receive the package, please contact us in time, before opening a return or case.
4.For more information please contact us info@diselmart.com. We will reply you in 24 hours.
Returns Policy
Wе аdорt a 30 dауѕ rеturn роlісу whісh mеаnѕ thаt аll рrоduсtѕ рurсhаѕеd оn оur wеbѕіtе mау bе rеturnеd tо uѕ wіthіn thе tіmе-frаmе. Yоu nееd tо соntасt uѕ wіthіn 30 dауѕ аftеr thе рrоduсt(ѕ) саmе іntо уоur роѕѕеѕѕіоn аnd thе рrоduсt(ѕ) muѕt bе rеturnеd tо uѕ wіthоut аnу unduе dеlауѕ. Rеturnеd рrоduсtѕ muѕt bе rеturnеd іn thе ѕаmе соndіtіоn аѕ thеу wеrе ѕеnt аnd thеу muѕt bе ѕеnt іn іtѕ оrіgіnаl расkаgіng. Returned іtеmѕ оvеr 30 days аrе ѕubjесt to a restocking fее.
Applicable circumstances for return and exchange:
Merchandise eligible for return or exchange must be:
– New, unused and in original condition;
–The problem of replacing the product is not man-made damage;
– Inclusive of all original hangtags, packaging, and components at the time of return or exchange.
– Accompanied by a proof of purchase (order confirmation email or number).
The return process
(1) You must first contact us providing us with the order number and reason for the return/exchange with our contact form. we will process the return application within 48 hours and reply to the processing result
(2) After the customer receives the response of the processing result, send it back and tell us the tracking number
(3) (if exchange): After receives return goods, we will re-ship and update the tracking number
Refund process
(1) After the website receives the returned product, it will take 3 days to process it. If there is no problem with the returned product, the refund will be received within 3 days
(2) What to do if the refund is not received:
If you haven’t received a refund yet, first check your bank account again. Then contact your credit card company, it may take some time before your refund is officially posted.
There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund yet, please contact us here
Feel frее tо contact uѕ rаthеr thаn ореn any case іf уоu have any рrоblеm, wе'll try оur bеѕt tо provide уоu thе bеѕt service.
After-sales contact information
Email: info@dieselmart.com
Whatsapp: +86 15157377230
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.Shipping address Please provide us with correct detailed shipping Address including postcode, and correct phone number that the carrier can contact you for delivery.
Handing Time
We ship within 3 business days upon receipt of payment average.
Delivery Time:
Standard shipping(USPS, FAR Internation, E Packet): To USA 7-14 Workdays, To other countries 10-20 Workdays.
Expedited Shipping (FedEx/DHL/UPS): To USA 2-6 Workdays, To other countries 3-8 Workdays.
This is normal condition, but sometimes international delivery is highly depended on the courier company and local customs/duties. Freight (Shipping Charges) The freight is calculated by weight and country. Different products and address will be of different freight. Please check directly at check-out page.
Taxes
Import duties, tax and charges are not included in the price listed or freight. These charges are buyer's responsibility.
