Something about fuel shut off solenoid

0 comments / Posted on by DengKevin

Something about fuel shut off solenoid

what does a fuel solenoid do?

how to bypass fuel shut off solenoid?

how do i know if my fuel solenoid is bad?

how to repair fuel shut off solenoid?


what does a fuel solenoid do?

Fuel solenoid is a fuel supply cut off valve for an engine to force it stop. It is a versatile component that is used to open and close a valve. They’re used to control the flow of diesel in a variety of residential and industrial applications.

how to bypass fuel shut off solenoid?

If the battery of machine is working, but the solenoid is dead

Step 1: Turn on ignition switch

Step 2: Track down the machine fuel shut off solenoid

Step 3: Find out the copper posts to be jumped

Step 4: Clean the carbon and rust deposits from the terminals

Step 5: Jump the fuel shut off solenoid


If the battery of the tractor is also dead

Step 1: Arrange a battery and jumper cables

Step 2: Notice the fuel solenoid and bypass it if required

Step 3: Locate the starter motor

Step 4: Keep connecting the wires one by one

Step 5: Turn the choke up and ignition switch on.

Step 6: Touch the negative terminal of the battery


how do i know if my fuel solenoid is bad?

First, find your fuel shut off solenoid. The stop solenoid is usually located at the entrance to the fuel injection pump or in the fuel line before the fuel injection pump. At a state of rest, the solenoid will have no power and need to be energised to allow the engine to run. In the case of a generator, the solenoid is usually controlled by the generator control panel. When you press the start button or turn a key, power is sent to the solenoid to allow it to open, before the engine is cranked. If the solenoid is not open, the engine won't start, because it will not have any fuel supply.

Second, you can look the performance of your diesel engine. If you see that it is abruptly shutting off, then one of the main reason is a lousy fuel shut off in the solenoid. It usually occurs when the electromagnetic component does not get adequately energized. So, when you try to start the engine, it shuts off without any preemptive warning.

Third, when you use your machine and find that acclleration isn’t smooth. We suggest you to change a new fuel shut off solenoid.

Fourth, When you try to start your tractor or excavator, you find the engine starts very poor. And after cleaning the solenoid it still same symptom. At this time you can change into a new fuel shut off solenoid.

Fifth, if you hear a harsh sound while starting the car for a few seconds, its time to check your solenoid. Generally, the rushing noise doesn’t last much. It appears when you start the engine and lasts for a few seconds. However, this can get annoying to various users. And if you leave it unchecked, the problem will increase, ultimately leading to a complete engine shutdown.

Sixth, when there is a lousy fuel shut-off, you will see that it’s precarious while idling your garden vehicle. It can be very annoying sometimes while idling your mower. You can’t focus on your other activities. It shuts off, or some noises throw up upon you.



Leave a comment

All blog comments are checked prior to publishing

Repacement brands

Custom Service
Free Returns in store
Secure Shopping
24H Help Center
You have successfully subscribed!
Verified Reviews