Fuel Temperature Sensor-Something you need to know

0 comments / Posted on by LiMona


The fuel temperature sensor plays an integral role in vehicle performance. This article mainly introduces the working principle of the fuel temperature sensor and common problems.


What is a Fuel Temperature Sensor?

A fuel temperature sensor is installed in vehicles to gauge the amount of fuel required for continuous performance. Engine Control Units (ECUs) of vehicles receive this information from the sensor.

Accordingly, the air-to-fuel mix ratio could be optimized based on the fuel temperature near the intake air temperature. The sensor allows the vehicle to operate at its optimal efficiency regardless of the outside temperature. A more efficient combustion process leads to fewer pollutants being released through the exhaust system.


How does the Fuel Temperature Sensor Work?

The fuel temperature sensor calculates the amount of fuel that should be injected. The sensor transmits this vehicle information to the Engine Control Unit (ECU). When the fuel is heated, it burns easily, as it is less dense, then the ECU is instructed to inject the fuel into the combustion chamber through a temperature sensor. This converse occurs when the fuel is cold.


What Does a Fuel Temperature Sensor Do?

A fuel temperature sensor contributes to the overall safety of the engine. It allows adjusting the fuel-injected amount into the cylinder. It’s a substantial fragment of the vehicle’s fuel system that panels and observes the fuel compression. The sensor entails a thermistor with diverse opposition rendering to the fuel temperature. In the case of low fuel temperature, the resistance gets higher.


Do you know how important it is to manage and monitor the temperature of the fuel injection system? It has a drastic impact on the engine’s performance. The fuel temperature sensor informs the Engine Control Unit when it gets too hot. It means that more fuel is required for the engine. It will make the fuel thicker and confirm that it doesn’t burn speedily. Preferably, the fuel temperature should be lower than 40°C. It helps in upholding the engine’s thermal competence.


Additionally, when the fuel gets too cool, it becomes denser. Thus, the car engine requires less fuel as it burns slower. Overall, the fuel temperature sensor is advantageous in defining the quantity of fuel vital.


The fuel temperature is located in the fuel rail in the engine. It is right next to the air intake pipe next to the throttle housing. You can check your car’s guide to find the exact location for more info. It might differ depending on the brand and make of the car.


The fuel temperature sensor is precisely designed to assess and evaluate the temperature of the vehicle’s fuel. Through this, it’s easier to optimize and manage the air-to-fuel mix ratio. A well-functioning fuel temperature sensor helps ensure the efficiency of the vehicle’s engine regardless of the outside temperature.


When the combustion process is carried out efficiently, it’s better for the environment. It means that fewer chemicals are discharged through the exhaust system. On the other hand, a poor fuel temperature sensor leads to stalling, decreased power, and fuel efficiency.



Symptoms of Bad Fuel Temperature Sensor

Poor Fuel Economy

It’s the most common symptom. Most importantly, a fuel temperature sensor helps ensure that the right amount and mixture of fuel is consumed. When there’s a higher fuel ratio, it is necessary to cool down the engine’s temperature. Thus, don’t miss the ECT reports.

In the case of a bad fuel temperature sensor, the reported temperature won’t be accurate. As a result, the automobile will consume more fuel than required. Thus, it will lead to poor fuel economy.


Unbalanced Temperature Evaluations

It’s another indication of a bad fuel temperature sensor. Here you’ll notice more fluctuations than usual in the temperature readings. When driving, it might show higher or lower than it is. If this is the case, it’s best to visit a mechanic urgently.


Black Smoke off the Exhaust

When the fuel temperature sensor is not working, it doesn’t calculate or regulate the fuel ratio. Thus, excess fuel is used and burnt in the combustion chamber. You can anticipate black smoke coming out of the exhaust pipe at periods.


All this indicates the excess consumption of fuel. It burnt off. However, a little bit is harmless. But it’s better not to ignore it and pull over immediately.


Overheating Engine

When the fuel temperature sensor is not working adequately, it usually gives cold signals. Thus, it messes up the system and gives wrong information. At times, your car will indicate an overheating engine when it isn’t. Your dashboard will have the warning lights on. If you ignore this, your car’s performance will be affected.


Check Engine Light Turns On

A bad fuel temperature sensor also turns the check signal lights on. It’s on the dashboard. That’s because the car’s system senses misleading and wrong signals. In this case, it’s best to visit your mechanic straightaway.



If you're aware of fuel temperature sensor problems with your machine or have questions about engine replacement components, Our website (DISELMART) has the answers you're looking for – and the products, too!



Leave a comment

All blog comments are checked prior to publishing

Repacement brands

Custom Service
Free Returns in store
Secure Shopping
24H Help Center
You have successfully subscribed!
Verified Reviews